Setting Ethernet Link
In the Base Reference Design GUI application, select a network from Setup →
Network Interface, as shown in
the Ethernet Status LEDs will be active on the SP605 board.
X-Ref Target - Figure 1-10
Spartan-6/SP605 Getting Started Guide
UG525 (v1.3) March 29, 2011
Getting Started with the Base Reference Design Demonstration
Figure
Ethernet
Cable
Figure 1-10: Connecting the Ethernet Link
www.xilinx.com
1-10. The GUI will indicate Connected to FPGA and
Ethernet LEDs
UG525_10_101910
15