Starting The Base Reference Design Gui Application - Xilinx Spartan-6 FPGA SP605 Getting Started

Starting the Base Reference Design GUI Application

To start the application GUI, go to the Windows start menu and select
All Programs → XILINX → Base Reference Design → Base Reference Design Interface
The screen shown in
.
X-Ref Target - Figure 1-8
Spartan-6/SP605 Getting Started Guide
UG525 (v1.3) March 29, 2011
Getting Started with the Base Reference Design Demonstration
Figure 1-8 is displayed.
Figure 1-8: Base Reference Design Interface
www.xilinx.com
UG525_08_101910
13