Input Setup; Digital Setup Sub-Menu - Onkyo TX-NR801 Instruction Manual

Configuring Input Settings Suitable for Your Connections—Continued
DIRECT / PURE AUDIO STEREO
Input source buttons
SETUP/ENTER/
RETURN/Cursor
/ / /

Input Setup

If the default input settings do not suit your connec-
tions, perform the following procedures to configure
your input settings.
The settings made in this menu are valid for the input
source that is currently selected with the input source
buttons on the front panel and, therefore, these settings
are made separately for each input source.
For details on the Input Setup settings when NET
AUDIO is selected as the input source, see page 74.
Basic Menu
0.Hardware Setup
1.Speaker Setup
2.Input Setup
3.Audio Adjust
→Advanced Menu
[ENTER]Quit:[SETUP]
If you want to perform these operations using the remote
controller, first press the RCVR button.
1 Press the input source button (or INPUT
SELECTOR button on the remote
controller).
2
Display the main menu.
Press the SETUP button on the front panel or
SETUP button on the remote controller to display
the main menu on the monitor and front display.
3
Use the and
"2. Input Setup" and then press the
ENTER button.
The "Input Setup" menu appears.
4
Use the and
an item and then press the ENTER button.
36
SETUP
TUNING
ENTER
RE TURN
PRESET
SURROUND THX DSP MEMORY FM MODE A-FO RM LISTENING MODE MEMORY
2.Input Setup
Input:DVD
1.Digital Setup
2.Multichannel Setup
3.Video Setup
4.Character Input
5.IntelliVolume
[ENTER]Quit:[SETUP]
cursor buttons to select
cursor buttons to select
5
Use the and
an item and then use the
buttons to set the desired value.
6
Press the SETUP button to exit the Setup
menu.
Press the RETURN button to return to the previ-
ous menu.

Digital Setup Sub-menu

AM is not selected as the input source)
This sub-menu concerns the input of digital signals
from input sources and if these settings are incorrectly
made, the digital audio signals may not be properly out-
put, or not heard at all. This sub-menu cannot be
selected if the selected input source button is AM, FM,
or NET AUDIO. It is not accessible if "Yes" is selected
in 2-2. Multichannel Setup Sub-menu and "Multichan-
nel" is selected in the AUDIO SELECTOR. Further-
more, VIDEO 5 is fixed to the optical digital terminal
on the front panel.
2-1.Digital Setup
Input:DVD
a.Digital Input
b.Digital Format
Initial settings for each input source
Input source
CD
PHONO
TUNER
TAPE
VIDEO 1
VIDEO 2
VIDEO 3
VIDEO 4
VIDEO 5
DVD
NET AUDIO
----: Available for digital input but not set in initial settings.
: Not available for digital input.
cursor buttons to select
and cursor
(When NET AUDIO, FM, or
:COAX1
:All
Quit:[SETUP]
Digital input
OPT 1
----
OPT 2
COAX 2
COAX 3
OPT 3
----
FRONT (fixed)
COAX 1