2-17. MAIN BOARD-2
Note 1: When the MAIN board is replaced, refer to "ABOUT WORK-
ING OF THE BOARD REPLACING" on page 5.
Note 2: When installing the MAIN
board, align the boss and
hole.
top side
MAIN board
boss
MAIN board
bottom side
Note 3: MAIN board is under
the rib.
hole
4 MAIN board
2 Move the BTL HP
board wire to the
outer side.
top side
front side
1 Move the LCD FPC
to the outer side.
NW-ZX300/ZX300A
MAIN board
hole
Note 2: When installing the MAIN
boss
MAIN board
hole
bottom side
rib
3 Remove the MAIN board in
the direction of the arrow.
bottom side
board, align the boss and
hole.
bottom side
29