NW-ZX300/ZX300A
4-2.
BATTERY SECTION
56
51
53
A
54
52
rear side
51
Note 1: Adhesive sheet fi xing the built-in rechargeable lithium ion
battery can be removed using a jig. Therefore, even if the ad-
hesive sheet is peeled from the built-in rechargeable lithium
ion battery, the built-in rechargeable lithium ion battery can be
reused. In case of the lithium ion battery are damaged during
the process of peeling the adhesive sheet, such as scratches or
exterior swelled etc. on the lithium ion battery, the lithium ion
battery cannot be reused. Be sure to replace the new parts.
Note 2: When wire of the battery assy (Ref. No. BAT1) is removed
from board, insulate the end of battery wire by a tape etc. to
prevent short-circuited of the battery wire part of the battery
assy (Ref. No. BAT1).
Ref. No.
Part No.
Description
51
4-573-907-31
SCREW (NDS-EL) M1.4 (L = 5.0 mm)
52
4-696-797-01
SPACER, PANEL
53
4-696-812-01
SHEET (SPACER PANEL) ADHESIVE
54
4-163-141-01
SCREW, 0+P 1.4X5
55
4-696-813-01
SHEET (REAR PANEL), PROTECTION
56
4-696-807-01
SCREW M1.4
48
57
55
54
lithium ion storage battery
51
NFC1
Remark
MAIN board section
58
BAT1
Note 3: When disposing of the battery assy (Ref. No. BAT1), refer to
"NOTE OF DISCARD THE BUILT-IN RECHARGEABLE
LITHIUM ION BATTERY" on page 3.
Note 4: When the battery assy (Ref. No. BAT1) is replaced, refer to
"CHECKING THE NEW RECHARGEABLE LITHIUM
ION BATTERY FOR BEFORE USE AND NOTES ON
HANDLING" on page 4.
Ref. No.
Part No.
Description
57
4-696-793-01
SPACER (TOP), REAR
58
4-696-809-01
SHEET, BATTERY ADHESIVE
BAT1
X-2595-744-1
SVX BATTERY ASSY (Including Battery sheet,
NFC1
X-2595-741-1
SVX REAR PANEL ASSY (Including NFC antenna)
top side
A
bottom side
Remark
Battery adhesive sheet) (See Note 1, 2, 3, 4)
front
side