Hp Se Assy-1 (Stereo Mini) - Sony NW-ZX300 Service Manual

2-10. HP SE ASSY-1 (STEREO MINI)

• Continued on 2-11 (page 24).
1 HP SE connector
(CN1001)
top side
front side
3 Remove the solder.
[black]
(L = 28 mm)
4 sheet (strap)
5 Remove the solder.
[white]
(L = 23 mm, black dot)
Insert the connector straight into the interior.
OK
Insert straight into
the interior.
connector
bottom side
2 Remove the solder.
[white]
(L = 23 mm, red dot)
4 sheet (strap)
6 Remove the solder.
[black]
(L = 24 mm, silver dot)
NG
Insert only part way.
connector
–
HP SE assy
NW-ZX300/ZX300A
connector
–
top side
MAIN board
1 Soldering the
SE HP board
wire [black].
(L = 24 mm,
silver dot)
2 Soldering the
SE HP board
wire [white].
(L = 23 mm,
black dot)
3 sheet (strap)
3 sheet (strap)
4 Soldering the
SE HP board
wire [black].
(L = 28 mm)
5 Soldering the
SE HP board
wire [white].
(L = 23 mm,
red dot)
23