Replacing The Gsc 10 Battery - Garmin Edge 800 Owner's Manual

replacing the gSC 10 Battery

1. Locate the circular battery cover
on the side of the GSC 10.
➊
➋
2. Use a coin to twist the cover
counter-clockwise until it is loose
enough to remove (arrow points to
unlocked).
3. Remove the cover and the battery
➋.
4. Wait 30 seconds.
5. Insert the new battery with the
positive side facing up.
Edge 800 Owner's Manual
NOTE: Be careful not to damage
or lose the O-ring gasket on the
➊
cover.
6. Use a coin to twist the cover
clockwise back into place (arrow
points to locked).
After you replace the GSC 10 battery,
you must pair it with the device again
(page 15).
Appendix
49