Training; Going For A Ride; Saving Your Ride Data; Alerts - Garmin Edge 800 Owner's Manual

Training

Training

going for a ride

Before you can record history, you
must locate satellite signals or pair
your Edge with an ANT+
(page 12).
1. From the timer page, press START
to start the timer.
History is recorded only while the
timer is running.
2. After completing your ride, press
STOP.
4
sensor
™

Saving Your ride Data

Press and hold RESET to save
your ride data and reset the timer.

Alerts

You can use Edge alerts to train toward
specific time, distance, calorie, heart
rate, cadence, and power goals.
Using Time, Distance, and
Calorie Alerts
1. Select MENU > Training > Alerts.
2. Select Time Alert, Distance Alert,
or Calorie Alert.
3. Turn on the alert.
4. Enter a time, distance, or calorie
amount.
5. Go for a ride.
Each time you reach the alert amount,
the Edge beeps and displays a message.
NOTE: To turn on audible tones for
messages, see page
Edge 800 Owner's Manual
41.