Table 2-9: Onboard 32-Bit Memory - DTK Apex 386/33 User Manual

Table 2-9: Onboard 32-Bit Memory

Note:
26
Chapter 2: Setting Up Your System
The switch setting for onboard 32-bit memory must match
the physical memory installed onboard.
The switch setting of the PEI-306 must correspond to the
physical memory installed on the card.
If you don't have a 16-bit memory extension card in your sys-
tem, the switch setting for total 32-bit memory must be for
an amount larger than or equal to total installed memory (in-
cluding onboard 32-bit memory and 32-bit memory on the
PEI-306).
For example, if the total memory installed is 8MB (4MB on-
board and 4MB on the PEI-306), the switch setting for total
32-bit memory could be 8MB, 12MB or 16MB.
But if you use some other BIOS with the switch settings
(SW1 -1, SW1 -2, SW1 -3) for total 32-bit memory larger than
the physical DRAM installed, there will be an error message.