Switch Settings; Figure 2-20: The Six-Switch Dip Sw1; Table 2-8: Total 32-Bit Memory - DTK Apex 386/33 User Manual

Switch Settings

The location of the six-switch DIP SW1 can be seen below. Each
switch has an ON and OFF position (usually the ON position is labeled,
the OFF position is not). SW1 should be set appropriately, based on
the following description.
Side View

Figure 2-20: The Six-Switch DIP SW1

Table 2-8: Total 32-Bit Memory

Note: Total 32-bit memory means onboard 32-bit memory plus that on
the PEI-306 32-bit extended memory card.
Chapter 2: Setting Up Your System
Top View
25