Table 2-2: Onboard 32-Bit Memory - DTK Apex 386/33 User Manual

Table 2-2: Onboard 32-Bit Memory

Note:
6
Chapter 2: Setting Up Your System
Memory Size (Bank 0, Bank 1)
2MB (1 MB, 1 MB)
4MB
(4MB, 0MB)
5MB (1 MB, 4MB)
8MB
(4MB, 4MB)
The switch setting of the onboard 32-bit memory must cor-
respond to the physical memory installed onboard.
The switch setting of the PEI-306 must correspond to the
physical memory installed on the card.
If you don't have a 16-bit memory extension card, the switch
setting for total 32-bit memory must be for an amount larger
than or equal to total installed memory (including onboard
32-bit memory and 32-bit memory on the PEI-306).
For example, if the total memory installed is 8MB (4MB on-
board and 4MB on the PEI-306), the switch setting for total
32-bit memory could be 8MB, 12MB or 16MB.
But if you use some other BIOS with the switch settings
(SW1 -1, SW1 -2, SW1 -3) for total 32-bit memory larger than
the physical DRAM installed, there will be an error message.
Switch SW1 (4 - 5)