Selection Example - Mitsubishi Electric MELSERVO-J4 MR-J4 A Series Instruction Manual

11. OPTIONS AND AUXILIARY EQUIPMENT
11.5 FR-CV Power regenerative common converter
When using the power regenerative common converter, set [Pr. PA02] to "_ _ 0 1".
(1) Model

(2) Selection example

The power regenerative common converter FR-CV can be used for the servo amplifier of 200 V class
with 750 W to 7 kW. The following shows the restrictions on using the FR-CV.
(a) Up to six servo amplifiers can be connected to one FR-CV.
(b) FR-CV capacity [W]
(c) The total of used servo motor rated currents should be equal to or less than the applicable current
[A] of the FR-CV.
(d) Among the servo amplifiers connected to the FR-CV, the servo amplifier of the maximum capacity
should be equal to or less than the maximum connectable capacity [W].
The following table lists the restrictions.
Maximum number of connected servo
amplifiers
Total of connectable servo amplifier
capacities [kW]
Total of connectable servo motor rated
currents [A]
Maximum servo amplifier capacity [kW]
POINT
For details of the power regenerative common converter FR-CV, refer to the FR-
CV-(H) Installation Guide (IB(NA)0600075).
Do not supply power to the main circuit power supply terminals (L1, L2, and L3)
of the servo amplifier. Doing so will fail the servo amplifier and FR-CV.
Connect the DC power supply between the FR-CV and servo amplifier with
correct polarity. Connection with incorrect polarity will fail the FR-CV and servo
amplifier.
Two or more FR-CV's cannot be installed to improve regeneration capability.
Two or more FR-CV's cannot be connected to the same DC power supply line.
When using FR-CV, set [Pr. PA04] to "0 0 _ _" to enable EM1 (Forced stop 1).
Total of rated capacities [W] × 2 of servo amplifiers connected to FR-CV.
Item
7.5K
Capacity
Symbol Capacity [kW]
7.5
7.5K
11
11K
15
15K
22
22K
30
30K
37
37K
55
55K
11K 15K
3.75 5.5 7.5
33 46 61
3.5 5 7
11 - 25
FR-CV-_
22K 30K 37K
6
11 15 18.5
90 115 145
11 15 15
55K
27.5
215
22