Machine Operation - Newco Mini-Cappuccino Instruction Manual

Machine operation and calibration settings
Dispense Membrane Switch
Dispense
*Note: The Hidden Button has a slight depression in the face of the membrane switch and
is centered between Dispense Buttons Two and Three below the 'TM'
Portion Control Mode:
To initialize the portion control mode perform the following steps:
1. Select cup size and position under desired dispense nozzle
2. Push and hold Hidden Button
3. While holding in Hidden Button also push and hold Dispense
Button which corresponds with dispense nozzle in step 1
4. After a 1-second pause the drink will start to dispense
5. Release the Hidden Button and continue holding the Dispense
Button until the cup is about 2/3 full . (Hold <3 sec's resets to manual)
6. Portion size is now in memory, if incorrect repeat until desired
dispense is achieved. Repeat steps for the other selections
7. Dispense can be cancelled by pressing any button a second
time .
PN 781596
Dispense
Button Button
One Two
(Left) (Center)
8
Hidden
Button*
Dispense
Button
Three
(Right)