Installing The 2 X 2.5-Inch Rear Drive Module Air Shroud - Dell PowerEdge R7625 Installation And Service Manual

Figure 39. Removing the 2 x 2.5-inch rear drive module air shroud
Next steps
1. Replace the 2 x 2.5-inch rear drive module air

Installing the 2 x 2.5-inch rear drive module air shroud

Prerequisites
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in
Steps
1. Align the tabs on the air shroud with the slots on the rear drive module.
2. Lower the air shroud into the rear drive module until it is firmly seated.
Figure 40. Installing the 2 x 2.5-inch rear drive module air shroud
Next steps
1. Follow the procedure listed in
shroud.
Safety instructions.
Before working inside your
After working inside your
system.
system.
Installing and removing system components 81