Using The Paper Basket And Paper Guides - Epson Stylus Pro 7700 User Manual

Epson Stylus Pro 7700/7710/9700/9710
Using the paper basket and
paper guides
To avoid your prints getting dirty or crinkled, set the
paper basket as explained below. The feeding
direction is different depending on the media type.
Direction Epson Stylus Pro
9700/9710
Forward Paper length:
1580 mm or longer
Paper thickness:
0.5 mm or more
Backward Paper length:
Less than 1580 mm
Paper thickness:
Less than 0.5 mm
Note:
Ejecting your prints in the wrong direction may cause
dirty or crinkled prints.
User's Guide
Paper Handling
When feeding paper forward
The paper guides keep the ejected prints straight. This
section explains how to switch the status from feeding
paper backward to feeding paper forward.
A
Epson Stylus Pro
7700/7710
Paper length:
914.4 mm or
longer
Paper thickness:
0.5 mm or more
Paper length:
Less than
914.4 mm
Paper thickness:
Less than 0.5 mm
B
C
40
For Epson Stylus Pro 9700/9710, bring the rear
basket up to the vertical position.
Remove the hook-and-loop fastener straps of
the front paper basket, and tilt it down.
Slightly tilt the front paper basket to set the
paper guides to the horizontal position.