Epson Stylus Pro 7700 User Manual page 32

Epson Stylus Pro 7700/7710/9700/9710
N
Insert the paper into the insertion slot. Pull the
paper down through the paper insertion slot so
that it comes out below.
Take care not to fold the edge of the paper, and
insert it so that there is no slack.
If you have difficulty feeding the paper, adjust
the paper suction by pressing the
button. Pull the paper to fit the edge of the
paper to the label position.
O
Close the roll paper cover.
User's Guide
Paper Handling
P
Press the
or
After a few seconds, the paper moves to the
printing position. When you press the
button, it moves immediately.
Q
If ARE THESE SETTINGS OK? appears on the
LCD panel, press the
NO and then press the
media type and paper remaining, and then
press the
The previous setting appears on the LCD panel.
If the media type and paper remaining are
correct, select YES and then press the
button.
R
If the edge of the roll paper has folds, press the
S
When using the paper basket, set it in the
forward or backward position.
If you are using Epson Stylus Pro 9700/9710,
you can also use the optional Auto Take-up
Reel Unit.
guides" on page 40
Epson Stylus Pro 9700/9710 only)" on page
44
32
button.
or
button. Set the
button to set the media.
button to cut the edge.
See "Using the paper basket and paper
See "Using Auto Take-up Reel Unit (For
button to select