Epson Stylus Pro 7700 User Manual page 140

Epson Stylus Pro 7700/7710/9700/9710
A
Prepare the print data by using an application.
The printer driver automatically enlarges the
image data during printing.
B
Open the printer driver window.
See "From Windows applications" on page
107
C
Click the Page Layout tab, select the
Multi-Page check box, select Poster, and then
click Settings.
D
In the Poster Settings dialog box, select the
number of printed pages you want the poster to
cover.
Note:
You can make a larger poster if you select a
greater number for division.
User's Guide
Variety of Printings
E
When you want to print a borderless poster,
select Borderless in the Main menu. Then,
select the Borderless Poster Print check box,
and select the number of panels, and then click
OK. Then go to step 6.
Note:
If Single Cut is selected for Auto Cut, the
length of the paper becomes 1 or 2 mm shorter
because the inside of each picture is cut in
order to not leave a white area at the top and
bottom areas.
Select Off or Normal Cut for Auto Cut.
on page 133
F
If you want margins around the poster, make
sure the Borderless Poster Print check box is
cleared, and make the other settings as necessary.
Note:
Regarding the size when the parts are joined
together:
The finished size whether Trim Lines is
selected or not is the same. However, if Print
Cutting Guides is selected, the finished size is
smaller by the amount of the overlap.
140
See "Roll paper cut for borderless printing"