Epson Stylus Pro 7700 User Manual page 81

Epson Stylus Pro 7700/7710/9700/9710
Aligning the print head manually
Because there is a distance between the print head and
paper, the misalignment may occur by the humidity
or temperature or moving the print head
bidirectionally. In this case, try UNI-D first, and then
BI-D 2-COLOR. If you want to perform a highly
accurate adjustment, try BI-D ALL.
Alignment Explanation
UNI-D Use all ink colors except Cyan to align
the print head unidirectionally.
BI-D 2-COLOR Use Cyan and Vivid Magenta ink color
to align the print head bidirectionally.
Bi-D ALL Use all ink colors to align the print
head bidirectionally.
A
Press the / button to select ALIGNMENT,
and then press the
B
Press the / button to select MANUAL, and
then press the
C
Press the / button to select UNI-D, and
then press the
D
Press the button to print the pattern.
Note:
When you print the pattern on a cut sheet
media, you need to prepare several sheets.
When the first page is printed, set the next paper.
E
Check the pattern and select the set number
that has the smallest gaps.
F
When UNI-D #1 C1 appears on the LCD
panel, press the
number, and then press the
G
Set the number for #1 C1 to #4 VM2, and press
the button.
H
Press the / button to select BI-D
2-COLOR. Then press the
I
Press the button to print the pattern.
J
Check the pattern and select the set number
that has the smallest gaps.
User's Guide
Maintenance
button.
button.
button.
/ button to select the
button.
button.
K
When BI-D 2-COLOR #1 VM1 appears on the
LCD panel, press the
the number, and then press the
L
Set the number for #1 VM1 to #4 C2, and then
press the
If you are not satisfied with the result of this
alignment, see the next section to try BI-D ALL.
After you set the patterns, press the
button to return to the READY state.
Bi-D ALL alignment
A
Press the /
and then press the
B
Press the
Note:
When you print the pattern on a cut sheet
media, you need to prepare several sheets.
When the first page is printed, set the next paper.
C
Check the pattern and select the set number
that has the smallest gaps.
D
When BI-D ALL #1 C1 appears on the LCD
panel, press the
number, and then press the
E
Set the number for #1 C1 to #4 C2, and then
press the
81
/ button to select
button.
button.
button to select BI-D ALL,
button.
button to print the pattern.
/ button to select the
button.
button.