Epson Stylus Pro 7700 User Manual page 71

Epson Stylus Pro 7700/7710/9700/9710
Note:
Put the used cutter in a bag or the like, and
dispose of it in accordance with local regulations.
I
Take the new paper cutter out of the package
and insert it as shown.
Install the cutter into the cutter holder, setting
the pin of the cutter to the hole of the holder.
J
Screw up the cutter firmly with a cross head
screwdriver.
Note:
Screw up the cutter firmly, otherwise the cut
position may be slightly shifted or skewed.
User's Guide
Maintenance
K
Align the downside of the cover and the cutter
holder, and then press the cover firmly until it
clicks.
L
Press the
M
Make sure the cover is installed, and press the
71
button.
button.