Configuring A Mail Server - Epson ET-L6550 Series User Manual

Administrator Information
Items
Require PIN Code when using IPP
printing
Enable AirPrint

Configuring a Mail Server

Set the mail server from Web Config.
When the printer can send the email by setting the mail server, the following are possible.
❏ Transfers the scan results or fax by using email
❏ Receives the email notification from the printer
Check below before setting up.
❏ The printer is connected to the network that can access the mail server.
❏ Email setting information of the computer that uses the same mail server as the printer.
Note:
❏ When you use the mail server on the Internet, confirm the setting information from the provider or website.
❏ You can also set the mail server from the printer's control panel. Access as below.
Settings > General Settings > Network Settings > Advanced > Email Server > Server Settings
1. Access Web Config and select the Network tab > Email Server > Basic.
2. Enter a value for each item.
3. Select OK.
The settings you have selected are displayed.
When the setup completes, perform the connection check.
Related Information
"Running Web Config on a Web Browser" on page 301
&
>
Settings to Use the Printer
Select whether or not to require a PIN code when using IPP printing. If you select
Yes, IPP print jobs without PIN codes are not saved in the printer.
IPP, Bonjour, AirPrint (Scan service) are enabled, and IPP is established only with
secure communication.
354
>
Configuring a Mail Server
Explanation