SETTINGS
This page does not auto refresh, to manually refresh swipe down or
press refresh
View Configuration – EDIT
When the edit button is pressed the equipment will be stopped
All the values are green, select the one to change
When back button is pressed the editable hardware configuration
will be updated
The configuration won't be applied to the controller at this time
There are hardware parameter inter interdependencies, when a
value is changed the dependencies from the current config will
be set in the editable hardware configuration
Manage Settings
Create Settings File will create a file that is saved on the phone which
contains all the settings points and their relinquish default value.
This is settings like Filter Runtime Hours Setpoint, Supply Fan
Maximum Speed Setpoint (vfd), Supply Fan Minimum Speed Setpoint
(vfd), Supply Fan Speed Command, Supply Fan Speed Command
Enable.
91