Menus And Submenus - Johnson Controls TEC3000 Series Quick Start Manual

the end of the hour to fulfill the minimum runtime unless
the occupancy state is set to Occupied.

Menus and submenus

In the following table, the * indicates that the menus depend on your configuration.
Table 7: Menus and submenus
Level 1
Setpoints
Scheduling
Level 2
Dehumidification
Temperature
Schedule Options
TEC3000 Series Proportional Fan Coil Thermostats Quick Start Guide
Level 3
Dehumidification
Cooling Valve Minimum Position*
Cooling Valve Starting Position*
Heating Valve Starting Position*
Coil Tempering Time*
Dehumidification Overcool Limit*
Chilled Water Supply Temperature Setpoint*
Occupied Cooling
Occupied Heating
Unoccupied Cooling
Unoccupied Heating
Standby Cooling
Standby Heating
Occ Setpoint Select
Heat Cool Setpoint Mode
Max Heating Setpoint*
Min Heating Setpoint*
Max Cooling Setpoint*
Min Cooling Setpoint*
Max Setpoint*
Min Setpoint*
Set Schedule
Optimal Start Enable
Temp Occ Duration
Motion Sensor Timeout
Manual Occupancy Mode
Schedule Source
13