Table of Contents
Advertisement
Available languages
Available languages
Icon
State of charge (SoC)
60 %
80 %
100 %
7 Installation
The electrical power supply must be connected by a qualified electrician who has demonstrated skill and
knowledge related to the construction and operation of electrical equipment and installations, and who
is familiar with the applicable regulations of the country in which the equipment is to be installed and/or
used, and has received safety training to identify and avoid the hazards involved.
Installation location
When selecting an installation location, consider the following:
• The mounting surface must be even and sufficiently solid.
• The battery monitor must be installed in a location that is protected from moisture and dust.
• Install the battery monitor inside the vehicle.
• Install the battery monitor in a well ventilated area, away from flooded batteries and places with free acid
gasses.
Mounting the display
NOTICE! Damage hazard
• Using wrong cables can lead to excessive overheating of the cables, high voltage drops, and possi-
ble failures. Use only the cables supplied.
• Ensure that no electrical cables or other parts of the vehicle can be damaged before drilling holes.
EN
13
Advertisement
Chapters
Table of Contents
