Safety Instructions - Dometic NDS IM12-150 Installation And Operating Manual

Battery monitor
Hide thumbs Also See for NDS IM12-150:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
EN

3 Safety instructions

WARNING! Electrocution hazard
• Installation and removal of the device may only be carried out by qualified personnel.
• Do not disconnect any cables when the device is in use.
• If this device's connection cable is damaged, the connection cable must be replaced by the manu-
facturer, a service agent or a similarly qualified person in order to prevent safety hazards.
• This device may only be repaired by qualified personnel. Improper repairs can lead to considerable
hazards.
• When the device gets disassembled: Detach all connections. Ensure that no voltage is present on
any of the inputs and outputs.
WARNING! Fire hazard
• Do not place the device on highly flammable surfaces.
• Do not cover the vents.
• Avoid the contact with direct heat sources.
WARNING! Health hazard
• This device can be used by children aged from 8 years and above and persons with reduced physi-
cal, sensory or mental capabilities or lack of experience and knowledge if they have been given su-
pervision or instruction concerning use of the device in a safe way and understand the hazards in-
volved.
• Electrical devices are not toys. Always keep and use the device out of the reach of very young
children.
• Children must be supervised to ensure that they do not play with the device.
• Cleaning and user maintenance shall not be made by children without supervision.
CAUTION! Electrocution hazard
• Do not operate the device if it is visibly damaged.
• Observe that parts of the device may still conduct voltage even if a fuse has blown.
• Do not use the device in wet conditions or submerge in any liquid. Store in a dry place.
• Only use accessories that are recommended by the manufacturer.
• Do not modify or adapt any of the components in any way.
CAUTION! Damage hazard
• Before start-up, check that the voltage specification on the data plate is the same as that of the pow-
er supply.
• Ensure that other objects cannot cause a short circuit at the contacts of the device.
• Ensure that the negative and positive poles never come into contact.
Installing the device safely
WARNING! Electrocution hazard
• Lay the cables so that they cannot be damaged by the doors or the hood.
• Crushed cables can lead to serious injury.
4
 

Advertisement

Table of Contents
loading

This manual is also suitable for:

Nds im12-150w

Table of Contents