Omron V330-F Series Connection Manual page 67

No. Overview
4.1. Receive Processing Start
4.2. Socket Service Parameter
Area Setting
No. Overview
4.3. Receive Request ON
4.4. Receive Request Switch ON
Description
Starts receive processing when "Receiving processing
required" is set.
Receiving process is skipped when "Receiving process not
required" is set.
The receive processing ends by moving to close processing.
Sets parameters required for receive processing.
・ Sets the number of bytes of receive data.
・ Sets the address type of the receive data storage area.
・ Sets the first word of the receive data storage area.
・ Sets the Receive Standby Time for receive data.
・ Clears the response code storage area.
Description
Turns ON the Receive Request Switch by manipulating
"Receive Request ON". (Turns ON and OFF "Receive
Request ON" to repeat receive processing.)
Starts the receive processing monitor timer and turns ON the
dedicated control bit for receive processing request.
9. Software Part
67