Omron V330-F Series Connection Manual page 27

In the PLC IO Table Window,
3
select Create from the Options
Menu.
A dialog box as shown in the
figure on the right appears. Click
Yes.
A dialog box as shown in the
figure on the right appears. Click
Yes.
The Transfer from PLC Dialog
4
Box is displayed. Select the
check boxes for IO Table and
SIO Unit Parameters and click
Transfer.
When the transfer is completed,
the Transfer Results Dialog Box
appears.
Check the messages in this
dialog box to confirm that the
transfer process is successfully
completed.
The figure on the right shows
Transfer Success: 1 Unit
Transfer Unsuccessful: 0 Unit,
which means I/O table creation is
7. Connection Procedure
27