Common Problems And Solutions; Problems With Powering Up The System - HP C160 Owner's Manual

Common Problems and Solutions

The tables in this section list common problems you may encounter with
your workstation. The tables also tell you what to do to help solve the prob-
lems.

Problems with Powering Up the System

Table 9 describes possible problems you may encounter when powering up
the system and offers solutions.
Table 9 Power -up Problems
Problem
The power LED does not
light.
The power LED lights,
but the screen is blank or
flickers.
If the problem persists, contact your system administrator or call your designated service
representative.
Make sure all AC power cables are connected securely to
the system.
Make sure the power cord is plugged into a working ac out-
let.
Make sure the power switch is set to the ON position.
Press the brightness control on the monitor to adjust it. If
the screen is still blank, turn off the system and monitor
power switches. When the system is completely powered
off, check the video cable connections.
Go to the section "Changing Your Monitor Type" in Appen-
dix B for information about displaying and setting your
workstation's monitor configuration.
Solving Problems
Common Problems and Solutions
Solution
73