Restarting The Application Gateway; Shutting Down The Application Gateway - Nortel 1000 Administration Manual

Chapter 2 Basic Administration

Restarting the Application Gateway

Restarting the Application Gateway
1
2

Shutting Down the Application Gateway

1
2
26 Application Gateway Administration Guide
After the configuration file is uploaded, the Application Gateway restarts.
If you saved the DDF file, you will need to upload it to the Application
Gateway.
To restart the Application Gateway:
In the Administration Tool, go to the Administration > Maintenance
page.
Click Restart.
Never shut down the Application Gateway by powering it off. Use the
Administration Tool to shut down the device. Use the power switch only
to power on the device.
You can also use the Reset button on the front of the Application Gateway
to perform a soft reboot.
To shut down the Application Gateway:
In the Administration Tool, go to the Administration > Maintenance
page.
Click Shut Down.