Trip Computer (For The 1.0 Firefly Hybrid Version) - Fiat 500 Manual

New mission
This begins after a reset:
"manual" resetting by the user, by
pressing the relevant button;
"automatic" resetting, when the "trip
distance" reaches 9999.9 km or when
the "travel time" reaches 99:59 (99
hours and 59 minutes);
after disconnection/reconnection of
the battery.
WARNING The reset operation when
"Trip A" or "Trip B" details are being
displayed resets the information
associated with the function displayed.
Start of journey procedure
With the ignition key in the MAR-ON
position, reset by pressing the TRIP
button and keeping it pressed for more
than 2 seconds.
Exit Trip
You can automatically exit the TRIP
function once all the values have been
displayed or by holding the MENU
button down for more than 1
second.
66
TRIP COMPUTER
(For the 1.0 FireFly
Hybrid version)
GENERAL INFORMATION
The Trip computer is used to display
information on car operation when
the ignition key is turned to MAR. It
is composed of two separate trips,
called "Trip A" and "Trip B", which can
monitor the "entire mission" (journey)
independently from each other.
The following screens are available:
Instant info (versions with colour
display):
Range
Current Consumption
Trip A:
Engine coolant temperature
(versions with multifunction
display)
Range (versions with
multifunction display)
Average Fuel Consumption A
Current Consumption (versions
with multifunction display)
Average Speed A
Travel Distance A
Travel Time A (driving time)
Energy Recovery A
Energy consumption A (versions
with colour display)
Auxiliary battery A (versions with
colour display)
Trip B:
Average Fuel Consumption B
Average Speed B
Travel Distance B
Travel Time B (driving time)
Energy Recovery B
Energy consumption B (versions
with colour display)
Auxiliary battery B (versions with
colour display)
Best Average Consumption (versions
with colour display) displays a screen
summarising the best average
consumption. The icon indicates
the best performance. This information
can be reset by resetting Trip A.
TPMS (for versions/markets, where
provided)
Nav Repeat (for markets/versions,
where provided)
NOTE "Range" and "Current
Consumption" values cannot be reset.
NOTE Both Trip A and Trip B can be
zeroed (reset - start of a new journey).
NOTE "Trip B" can be activated or
deactivated from the setup menu
on the display with the "Trip B
Activation/Data" function. For further
information see the "Display" paragraph
in this chapter.