Fiat 500 Manual page 160

REVERSING LIGHT/REAR FOG
LIGHT
To replace the bulb, proceed as
follows:
access the bulb holder through the
underside of the rear bumper fig. 157;
157
disconnect the electrical connector
(A) fig. 158;
rotate the bulb holder (B) fig. 158
anticlockwise and extract it;
release the bulb and replace it;
158
reinsert the bulb/bulb holder unit (B)
by turning it clockwise;
reconnect the electrical connector
(A).
THIRD BRAKE LIGHTS
To replace the bulb proceed as follows:
remove the two guard caps and
unscrew the two fastening screws (A)
fig. 159;
F0S0674
159
remove the assembly;
disconnect the electrical connector
(B) fig. 160;
press the retaining device (C) fig. 160
and open the bulb holder;
F0S0582
160
remove the press-fitted bulb to be
replaced and replace it;
close the bulb holder making sure
the retaining device is correctly locked;
screw in the two fastening screws
and reinstall the guard caps.
NUMBER PLATE LIGHTS
To replace the bulbs, proceed as
F0S0058
follows:
operate in the point shown by the
arrow fig. 161 and remove the lens;
161
F0S0059
F0S0139
151