Fiat 500 Manual page 157

REPLACING AN
EXTERNAL BULB
FRONT LIGHT CLUSTERS
The front light clusters contain side/tail
lights, dipped headlights, main beam
headlights and direction indicator
bulbs.
Front direction indicators
(POP versions only)
To replace the bulb, proceed as
follows:
operating from the engine
compartment remove the rubber cap
(A) fig. 146;
146
turn the bulb holder (A) fig. 147
anticlockwise and extract it;
remove the pressure-fitted bulb and
replace it;
refit the bulb holder (A) by turning it
clockwise and making sure that it locks
correctly;
148
refit the rubber cap.
147
Front direction indicators
(Excluding POP versions)
To replace the bulb, proceed as
follows:
operating in the engine
compartment, remove the plastic cap
(A) fig. 148 by turning it anticlockwise;
F0S0050
148
turn the bulb holder anticlockwise
and remove it;
replace the bulb-bulb holder
assembly;
refit the bulb holder in its housing
(A) fig. 149 by turning it clockwise and
locking it correctly;
F0S0052
149
refit the protection cap in its housing
and turn clockwise.
Side direction indicators
WARNING The intervention must be
carried out taking all precautions
necessary to avoid damaging the
bodywork (please use a sufficiently rigid
and appropriately thick plastic card).
To replace the bulb, proceed as
follows:
lever the lens off, by initially applying
force from the front towards the back
F0S0591
(1-fig. 150);
then lever in the opposite direction,
by applying force from the back part (2-
fig. 150) and remove unit;
F0S0608