Fiat 500 Manual page 259

"Tracks": list of available tracks.
"Map": navigation map view (versions
with Uconnect™ 7" HD Nav LIVE
only).
At the bottom: information on the
track being played and the following
graphic buttons:
Active device or audio source;
/ : previous/next track
selection;
: pause track being played;
"Audio": access to the "Audio
Settings" screen.
Track selection
Use this function to scroll through and
select the tracks on the active device.
The choices available depend on
the device connected. For example,
on a USB device, you can also use
the SCROLL TUNE button/knob to
scroll through the list of artists, genres
and albums available on the device,
depending on the information available
in the tracks.
Turn the SCROLL TUNE button/knob
to select the desired category and then
press the button/knob to confirm the
selection.
NOTE The indexing time of a USB
device can vary depending on the
media inserted (in some cases it can
take a few minutes).
250
NOTE The Uconnect™ system may
not support some USB keys: in this
case, it will not automatically switch
from "Radio" mode to "Media" mode. If
the device used does not play, verify its
compatibility by selecting Media mode:
a dedicated message will appear on
the Uconnect™ system display.
IMPORTANT After using a USB
recharging socket, we recommend
disconnecting the device (smartphone),
always removing the cable from the
vehicle socket first, never from the
device.
NOTE The USB ports handle
data transmission from the Pen
Drive/Smartphone, etc. and slow
recharging of an external device, which
is not guaranteed as it depends on the
device type/brand.
Bluetooth® SOURCE
This mode is activated by pairing a
Bluetooth® device containing music
tracks with the system.
PAIRING A Bluetooth® AUDIO
DEVICE
To pair a Bluetooth® audio device,
proceed as follows:
activate the Bluetooth® function on
the device;
press the "Media" graphic button on
the display;
press the "Select Source" button;
select the Bluetooth® Media
source;
press the "Add Device" graphic
button;
search for "Uconnect" on the
Bluetooth® audio device (during
pairing, a screen showing the progress
is displayed);
when requested by the audio device,
enter the PIN code shown on the
system display or confirm on the device
the PIN displayed;
if the pairing procedure is completed
successfully, a screen is displayed.
Answer "Yes" to the question to pair
the Bluetooth® audio device as
favourite (the device will have priority
over all other devices to be paired
subsequently). If "No" is selected, the
priority is determined according to the
order of connection. The last device
connected will have the highest priority;
an audio device can also be paired
by pressing the "Phone" graphic
button on the display and by selecting
"Settings" or selecting "Phone/
Bluetooth®" from the "Settings"
menu.
WARNING If the Bluetooth®
connection between mobile phone
and system is lost, consult the mobile
phone handbook.