Fiat 500 Manual page 27

12
Height adjustment
(for versions/markets, where provided)
Operate lever (B) fig. 13 to lift or lower
the rear part of the cushion to achieve
the most comfortable driving position.
13
Reclining the backrest
11)
4)
To fold the backrest over, adjust lever
(D) fig. 14 (movement 1) and push
18
the backrest forwards until it locks
(movement 2).
Then release lever (D) and, pushing on
the backrest, slide the seat forward
(movement 3).
F0S0014
14
Driver side and passenger side,
with position memory
(for versions/markets, where provided)
To bring back the seat in its initial
position proceed as follows:
slide the seat backwards pushing on
the backrest, until the seat is locked
(movement 4);
adjust lever (D) fig. 14 (movement 5);
raise the backrest (movement 6) until
F0S0015
you hear the lock click.
WARNING Using lever (D) fig. 14 before
locking the seat in its initial position will
cause the initial seat position to be lost.
In this case the position of the seat
must be restored through lengthwise
adjustment lever (A) fig. 11.
Passenger side without position
memory
To bring back the seat in its initial
position proceed as follows:
slide the seat backwards pushing
on the backrest to the desired position
(movement 4);
adjust lever (D) fig. 14 (movement 5);
raise the backrest (movement 6) until
you hear the lock click.
The type of reattachment manoeuvre
has been chosen to guarantee the
safety of the occupant.
If an obstacle is present (e.g. a bag)
and the seat cannot be returned to
F0S0154
its original position, the mechanism
reattaches the seat only positioning
the backrest to ensure that the seat is
correctly attached to its guides.
REAR SEATS
EXTENDING THE BOOT
11)
4)
The separate rear seats allow partial
fig. 15 or total fig. 16 boot extension.