Nortel Meridian Companion Operation Manual page 14

Page 10 of 20 Programming the Meridian Companion system
553-3601-320 Standard 2.00 November 1998
Press ƒ••· and enter the Administration password. The
1.
display shows 1. Registration .
Press * . The display shows 2. User Options .
2.
Press ^ . The display shows Radio loss hdlng .
3.
Press ^ to specify a default phone number. The display shows
4.
Change Default .
Press * . The display shows Change WTN: .
5.
6. Enter the wireless terminal number (WTN). The display shows
Wccuu:None or Wccuu: followed by the phone number.
7. Press CHANGE to specify a new phone number or press DFLT to specify
the default phone number.
8. Enter up to 16 digits for the phone number using 0 to 9 and the *. The *
will add a 2-second pause. The DFLT softkey appears only if a default
phone number has been previously specified. Use BKSP for corrections.
9. Press OK to confirm the phone number. The display shows
WTN ccuu: followed by the number.
Note: If you do not enter digits and then press OK , the phone number
is deleted and Wccuu: None appears on the display. Go back to
step 7.
Press * to go to the next WTN.
10.
11. Record the individual Transfer on Radio Loss defaults in Meridian
Companion Programming and Provisioning Record.
Press * or & to search through the WTNs.
12.
To continue in Administration programming, press % . To exit,
13.
press ® .