Programming System-Wide Transfer On Radio Loss - Nortel Meridian Companion Operation Manual

program a portable so that it routes lost calls to the individual's secretary or
answering machine rather than to the receptionist.

Programming system-wide Transfer on Radio Loss

Press ƒ••· and enter the Administration password. The
1.
display shows 1. Registration .
Press * . The display shows 2. User Options .
2.
Press ^ . The display shows Radio loss hdlng .
3.
Press ^ to specify a default phone number. The display shows
4.
Change Default .
Press ^ . The display shows
5.
f
ollowed by the default number.
6. Press CHANGE .
7. Enter up to 16 digits for the default phone number using 0 to 9 and *.
The * will add a two second pause. Use BKSP for corrections.
8. Press OK to confirm the phone number. The display shows
Change Default .
Note: If you do not enter digits and press OK ,
9. Record the default phone number for Transfer on Radio Loss in
Meridian Companion Programming and Provisioning Record.
Press % to continue in Administration programming. To exit,
10.
press ® .
Programming Individual Transfer on Radio Loss
There are three settings for individual lines:
• None: The call is not transferred if the link is lost.
• Default: The call is transferred to the phone number chosen for the
whole system.
• nnn: A specific phone number to which a call is transferred if a link is
lost.
Programming the Meridian Companion system Page 9 of 20
Go back to step 7.
Meridian Companion Administration Terminal Operations Guide
Dflt:None flt:
or D
Dflt: None
appears.