Task Table - Nortel 2350 User Manual

86 Configuring Wireless Services
and data over a single wireless backbone, reserving some portion of network bandwidth to support real-time voice
communications.
For a VoWIP service (sometimes also referred to simply as VoIP, or Voice over IP), you can configure either local or
RADIUS server authentication, and add Access Lists (ACLs) to restrict user access.
This section contains the following information about how to configure VoWIP services:
• "Task Table" on page 86
• "Step Summary" on page 87
• "Create a Service Profile for WMM VoWIP Devices" on page 89
• "Create a Service Profile for SVP VoWIP Devices" on page 93
• "Create a Service Profile for Avaya VoWIP Devices" on page 95
Table 4 contains the tasks you must perform to configure Guest access services. The table contains references to
"Example: Configure Employee Access" on page
steps. However, be sure to use the configurable options for VoWIP access services set forth in the
page 87. The "Step Summary" provides the configurable options you should set.

Task Table

Table 4 contains the tasks you need to perform to create VoWIP access services. For a summary of configurable items,
refer to "Step Summary" on page
Table 4: Creating a Service for VoWIP Access
Task Path
"Create a Radio 1. Tool bar option: Select
Profile" on Configuration.
page 57
2. Organizer panel: Expand the
WSS.
3. Expand Wireless.
4. Click Radio Profiles.
5. Select Radio Profile in the Task
List.
NN47250-101 (320665-G Version 02.01)
56. The references are provided in case you want to refer to detailed
87.
Primary Parameters to Configure
From the Create Radio Profile wizard:
•
For SpectraLink, from the Radio Profile
Properties dialog:
•
After you create the service profile, you can map it
to the radio profile.
After you install the APs, you can map their radios
to the radio profile.
Note: The examples in this chapter configure the
radio profile first. However, you also can
configure the radio profile later as part of service
profile configuration.
Radio profile name: Enter a name
802.11 attributes: Change DTIM to 3
"Step Summary" on