Nortel 2350 User Manual page 119

11 Click Next. The Default Device Settings page appears.
12 To change the default WSS model, select the model from the WSS Model list.
13 To change the default AP model, select the model from the Default AP Model list.
14 To change the AP connection type, select the one of the following types from the AP Connection Type
list:
• Direct—APs are directly attached to dedicated WSS ports.
• Distributed—APs can be indirectly attached through intermediate Layer 2 or Layer 3 devices.
• Distributed (Auto)—APs can be indirectly attached through intermediate Layer 2 or Layer 3
devices. WMS automatically configures the APs using a profile that assigns a Distributed AP
number and name to the AP from among the unused valid AP numbers available on the
switch.
15 Click Next. If you selected Direct or Distributed in the AP Connection Type list, the Redundant
Connections page appears. Go to
list, the Capacity Planning for Data page appears. Go to
step 16. If you selected Distributed (Auto) in the AP Connection Type
Nortel WLAN Management Software 2300 Series User Guide
Using Auto-RF with Modelling 119
step 20.