Nortel 2350 User Manual page 135

To create a building
1
In the Organizer panel, click the site name.
2
Select Create Building in the Task List panel. The Create Building wizard prompts you for information
about the new building.
3
In the Building Name box, type the name of the building (1 to 30 alphanumeric characters, with no spaces
or tabs), and click Next.
4
In the Number Of Floors box, specify how many floors the building has.
When you specify the number of floors a building contains, WLAN Management Software creates each
floor using the default settings. You can edit the floors WLAN Management Software creates or you can
add new floors.
5
In the Starting Floor Level box, specify the floor number of the first floor in the building. To start with a
subterranean floor, you can specify 0 or a negative floor number.
6
In the Skip Floor Levels box, specify floor numbers you want to skip. Skipping floors is useful when you
want to model only certain floors in a building. Use commas to separate the floor numbers in a list; for
example: 1,3,7. Use a hyphen when entering a range; for example: 8-12.
7
Click Finish to close the wizard.
To add a floor to the building
1
In the Organizer panel, click the building name.
2
Select Create Floor in the Task List panel. The Create Floor wizard prompts you for information about the
new floor.
Nortel WLAN Management Software 2300 Series User Guide
Using RF Planning 135