What's Next - Nortel 2350 User Manual

100 Configuring Wireless Services
To tag ports in the VLAN, select Tag and edit the tag value. (Tagging is required if you click Add,
because the ports are then members of multiple VLANs.)
7
Click Next. (Optional) To assign an IP interface to the VLAN, edit the IP address or select DHCP Client.
To enable the IP interface, select Interface Enabled.
8
Click Finish.
The new VLAN appears in the Content panel.
For SVP, continue with the following steps, to disable IGMP snooping. For VoWIP types that do not
require IGMP to be disabled, stop here.
9
Select the VLAN in the VLANs table and click Properties.
10 Click the IGMP tab.
11 Deselect Enabled, to disable IGMP snooping on the VLAN.
12 Click OK.

What's Next?

After you create VoWIP access services, you can create another service.
For information about configuring an additional service, refer to the following:
• "Configure Guest Access Services" on page 69
You can create your RF environment, and deploy your configuration and enable monitoring.
For information about creating your RF environment, refer to the following:
• "Using Auto-RF" on page 101
• "Using Auto-RF with Modelling" on page 109
• "Using RF Planning" on page 129
For information about deploying your configuration and enabling monitoring your network, refer to the following:
• "Managing and Monitoring Your Network" on page
NN47250-101 (320665-G Version 02.01)
161.