Selecting the Unit of Measurement
1.
Hold down the Reset button, and turn
on the Power switch.Do not release the
Reset button.
2.
While continuing to press the Reset
button, allow approximately 15
seconds for the unit of measurement to
switch from mg/dL to µmol/L, or vice
versa.
3.
Visually ensure that the unit's display
has changed.
4.
Release the Reset button. The Ready
lamp lights up, indicating that the
instrument is ready to take a
measurement.
5.
To change the unit of measurement
once more, turn off the Power switch,
and repeat step 1.
Jaundice Meter (Model JM-103) User Manual (usr070rb)
Page 4 - 3