Managing The 4Gb San Switch; Management Features Of The 4Gb San Switch - HP Brocade 4Gb SAN Installation Manual

3 Managing the 4Gb SAN Switch

This chapter provides the following information:
Management features of the 4Gb SAN
Maintaining the 4Gb SAN
Powering the 4Gb SAN Switch on and
Interpreting LED
LED locations on the 4Gb SAN
LED patterns, page 39
POST and boot
Interpreting POST

Management features of the 4Gb SAN Switch

The management tools built into the 4Gb SAN Switch (listed in
monitor fabric topology, port status, physical status, and other information used for
performance analysis and system debugging.
When running IP over FC, these management tools must be run on both the Fibre Channel
host and the switch and must be supported by the Fibre Channel host driver. For a list of Fibre
Channel hosts supported by the 4Gb SAN Switch, contact your HP representative.
Switch, page 37
activity, page 38
Switch, page 39
specifications, page 43
results, page 44
Brocade 4Gb SAN Switch for HP p-Class BladeSystem installation guide
Switch, page 35
off, page 38
Table 6), can be used to
35