Shipping Carton Contents; Installation And Safety Considerations - HP Brocade 4Gb SAN Installation Manual

Shipping carton contents

Figure 2 and
1
Figure 2

Shipping carton contents

Table 5

Shipping carton contents

Item Description
Number
One HP Brocade 4Gb SAN Switch for HP p-Class BladeSystem quick setup instructions
1
One 4Gb SAN Switch
2
3 and 4
One 10-inch miniature serial cable and one RS-232 Serial cable
Two 4Gb short wavelength (SWL) small form-factor pluggable (SFP) optical transceivers
5
One HP ProLiant BL p-Class FC signal conditioning card
6
If necessary, convert this RS-232 cable to an RJ45 serial connector by removing the adapter
on the end of the cable.

Installation and safety considerations

HP recommends installing the 4Gb SAN Switch into the back of the HP p-Class BladeSystem
enclosure with the Interconnect switch power off.
22 Installing the 4Gb SAN Switch
Table 5 list the shipping carton contents for the 4Gb SAN Switch kit.
3
2
6
4
5
0011b