Figure 2-8 Appearance Of The Mainboard - Symantec NetBackup 5200 Product Description

2 Product Components

Figure 2-8 Appearance of the mainboard

1
2
3
4
5
6
l
l
l
l
Features
The mainboard processes services and provides inband and out-of-band management and
baseboard management controller (BMC) module. It supports IPMI 2.0 and monitors and
manages devices through an inband channel and an out-of-band channel.
2-10
Memory socket
USB 2.0 port
Serial port
VGA port
Service network port (NIC 2)
Service network port (NIC 1)
NOTE
The slot 1 in Figure 2-8 is PCI-E x 16, but only the PCI-E x 8 slot is used in actual situations. Therefore,
the mainboard provides one PCI-E x 4 and three PCI-E x 8 slots.
The RAID card is installed in slot 0 in
(Configuration mode 1) The 10GE NIC is installed in slot 2 in
(Configuration mode 1) The 8Gb FC HBA is installed in slot 3 in
(Configuration mode 2) The 8Gb FC HBA is installed in slot 1, slot 2 and slot 3 in
2-8.
NOTE
The inband channel management uses a service channel to manage the NetBackup 5200, such as the service
network port; the out-of-band channel management uses the management channel to manage the
NetBackup 5200, such as the management network port.
Symantec Corporation
7 IPMI Management network port
8 CPU heat sink
9 Slot 0: PCI-E x 8
10 Slot 1: PCI-E x 8
11 Slot 2: PCI-E x 8
12 Slot 3: PCI-E x 4
Figure 2-8.
NetBackup 5200
Product Description
Figure 2-8.
Figure 2-8.
Figure
Issue 02 (2011-03-28)