Signal Cable; Network Cable; Figure 3-3 Structure Of The Network Cable - Symantec NetBackup 5200 Product Description

NetBackup 5200
Product Description
Item
Cable length

3.2 Signal Cable

This section describes the structure, cable connection list, and technical specifications of the
external signal cables used in the NetBackup 5200.

3.2.1 Network Cable

This section describes the structure, cable connection list, and technical specifications of the
network cable.
3.2.2 Multi-Mode Fiber
This section describes the structure and technical specifications of the multi-mode fiber.
3.2.3 Serial Cable
This section describes the structure, cable connection list, and technical specifications of the
serial cable.
3.2.1 Network Cable
This section describes the structure, cable connection list, and technical specifications of the
network cable.
The NetBackup 5200 communicates with the outside through a network cable. One end of the
network cable connects to the management network port or service network port of the
NetBackup 5200, and the other end connects to the network switch or the AS. Both ends of the
cable are RJ-45 connectors.
Structure
Figure 3-3

Figure 3-3 Structure of the network cable

1
Cable Connection List
Table
Issue 02 (2011-03-28)
Description
0.5 m
shows the structure of the network cable.
RJ-45 connector
3-4shows the cable connection list of the network cable.
Symantec Corporation
3 Device Cable
3-5