Technical Specifications - Symantec NetBackup 5200 Product Description

1 Product Introduction
Feature
High performance
and large capacity
High reliability
Easy management
a: Dual Inline Memory Module
b: Input/Output Acceleration Technology
c: Mean Time between Failures
d: Keyboard Video Mouse
e: Dynamic Host Configuration Protocol
f: Simple Network Management Protocol

1.6 Technical Specifications

This section describes the technical specifications of the NetBackup 5200.
Table 1-11
1-16
Description
Supports up to 24 SATA disks, with a raw capacity of up to 48 TB.
l
Supports high-performance processors with low power
l
consumption.
Provides large-capacity intra-system switching bandwidths and
l
high I/O throughout.
Provides eight DIMMs
l
Supports IOAT
l
capability.
Supports RAID 1 and RAID 6.
l
Supports redundant power modules.
l
Supports hot-swappable disk modules and power modules.
l
c
MTBF
l
Provides separate out-of-band management network interfaces,
l
allowing customers to remotely power on, power off, and reset
devices through the network.
Supports remotely configuring and managing devices through
l
d
KVM
Provides customized management interfaces, simplifying
l
maintenance operations and saving maintenance labor.
Supports DHCP
l
management server, thus reducing configuration operations.
Supports SNMP
l
Supports reporting the disk information through the out-of-band
l
management channel.
lists the technical specifications of the NetBackup 5200.
Symantec Corporation
a
and supports 32 GB memory .
b
to meet the diverse requirements on processing
5
> 10 h.
over IP.
e
and automatically obtains the IP address from the
f
Trap and automatically reports alarms.
NetBackup 5200
Product Description
Issue 02 (2011-03-28)