Generating 3D Reconstructions - Siemens SOMATOM Emotion Quick Manual

5 Performing an examination
42
3 Adapt the recon range in the topo or tomo segment by clicking
and dragging the handles that are displayed around the graphic
range objects.
4 Edit other parameters on the Recon sub-task card, if necessary.
• Slice: the image width
• Kernel: the parameter that affects image sharpness and noise
• Window: window values define the brightness and contrast of
recon images, based on organ-specific CT values
• Recon increment: the distance between images
5 Click Recon.
Resonstruction starts. In the tomo segment, all images calculated
are displayed one after the other.

Generating 3D reconstructions

5.6
To improve workflow efficiency, you can perform 3D image
reconstruction directly on the Recon sub-task card. This is more
convenient than evaluation using the separate 3D task card.
Quick Guide
Print No. HC-C2-025.626.01.01.02