Section 6: Maintenance; Schedule; Cleaning & Protecting; Lubrication - Grizzly T33127 Owner's Manual

SECTION 6: MAINTENANCE

To reduce risk of shock or
accidental startup, always
disconnect machine from
power before adjustments,
maintenance, or service.

Schedule

For optimum performance from this machine, this
maintenance schedule must be strictly followed.
Ongoing
To minimize your risk of injury and maintain proper
machine operation, shut down the machine imme-
diately if you ever observe any of the items below,
and fix the problem before continuing operations:
• Loose mounting bolts.
• Damaged cutting tools.
• Worn or damaged wires.
• Any other unsafe condition.
Weekly Maintenance
• Clean/grease hold-down shaft.
Monthly Check
• Clean/vacuum dust buildup off motor.
Cleaning &
Protecting
Cleaning the Model T33127 is relatively easy.
Vacuum excess wood chips and sawdust, and
wipe off the remaining dust with a dry cloth. If any
resin has built up, use a resin dissolving cleaner
to remove it. Treat all unpainted cast iron and steel
with a non-staining lubricant after cleaning.
-28-
Protect the unpainted cast iron table by wiping
it clean after every use—this ensures moisture
from wood dust does not remain on bare metal
surfaces. Keep the table rust-free with regular
applications of products like G96
SLIPIT , or Boeshield
® ®
Recommended Metal Protectants
G5562—SLIPIT 1 Qt. Gel
®
G5563—SLIPIT 12 Oz. Spray
®
G2870—Boeshield T-9 4 Oz. Spray
®
G2871—Boeshield T-9 12 Oz. Spray
®
H3788—G96 Gun Treatment 12 Oz. Spray
®
H3789—G96 Gun Treatment 4.5 Oz. Spray
®
Figure 37. Recommended products for protect-
ing unpainted cast iron/steel parts on machinery.

Lubrication

The augers for mortising chisels operate under
extreme conditions. A small amount of bees wax
applied to the auger can aid in reducing heat and
expelling chips. It is important that a small amount
is used and none is applied to the chisel. Bees
wax coming into contact with the finished surfaces
will impede adhesion of glues and finishes.
Model T33127 (Mfd. Since 10/21)
Gun Treatment,
®
T-9 (see Figure 37).