Config; Endpnt Name; Protocol; Figure 4-8. Config Menu Tree - ADTRAN ATLAS User Manual

C
ONFIG
Packet Manager Packet Cncts
E N
NDPNT AME
P
ROTOCOL
C
ONFIG
61200263L1-1.1
DE D C
ISCARD OUNT
Total number of Discard Eligible bits that have been received on this
PVC.
FECN C
OUNT
Total number of FECN bits received on this PVC.
R C
ESET OUNTERS
Resets all sublink counters.
Creates and configures packet endpoints (see the menu tree in Figure 4-8).
Status
Packet Endpnts Performance

Config

Cncts Sort Test
Frame Relay IQ Endpnt Count
Endpnts Sort
Write Security: 3; Read Security: 5
Simplifies configuration with user-definable names such as the name of the
frame relay provider or the circuit ID.
Write Security: 3; Read Security: 5
Defines the protocol operating on this port. F
packet endpoint to frame relay. TBOP configures this packet endpoint as
transparent bit oriented protocol. PPP configures this packet endpoint as
point-to-point protocol.
Write Security: 3; Read Security: 5
Displays the configuration for this packet endpoint. This menu is protocol-
dependent. TBOP requires no configuration. The selections for this menu
when Frame Relay is the protocol are listed in Config (Frame Relay as proto-
col) on page 4-10 and shown in Figure 4-9 , and the selections for this menu
when PPP is the protocol are listed in Config (PPP as protocol) on page 4-13
and shown in Figure 4-9.
ATLAS Frame Relay User Manual
Chapter 4. Defining Packet Endpoints

Endpnt Name

Protocol

Frame Relay
Config TBOP
Sublinks PPP
Usage

Figure 4-8. Config Menu Tree

configures this
R
RAME ELAY
4-9