Table of Contents
Advertisement
Chapter 5. Connecting Packet Endpoints
N
T
ETWORK
ERM
DID D
IGITS
T
RANSFERRED
DID P
REFIX
T
N
RUNK
UMBER
U
T
SER
ERM
DID D
IGITS
T
RANSFERRED
C
ID
ALLER
N
UMBER
S
ID
OURCE
5-8
Write Security: 3; Read Security: 5
Defines the number of digits sent to ATLAS from the Network if D
(see page 5-7) is enabled.
I
D
NWARD
IALING
Write Security: 3; Read Security: 5
Defines to ATLAS the prefix digits which are not received as a part of the
DID number. ATLAS uses the combination of prefix and DID number to
determine the user endpoint that should receive the incoming call.
Write Security: 3; Read Security: 5
Determines which user endpoint should receive the incoming call when the
network connection does not provide DID digits. This field only displays if
D
I
D
IRECT
NWARD
IALING
T
(see page 5-8) is selected.
ERM
Write Security: 3; Read Security: 5
Defines the number of digits ATLAS is to send to the user equipment. This
field only displays if D
IRECT
Enabled.
Write Security: 3; Read Security: 5
Defines the number ATLAS uses to provide caller ID to the network for out-
going calls sent through this endpoint. This field only displays if D
(see page 5-7) is set to D
I
D
NWARD
IALING
selected. Setting this menu item is optional.
Write Security: 3; Read Security: 5
Defines the source ID. This field only displays if D
(see page 5-7) is set to D
menu item is optional.
ATLAS Frame Relay User Manual
(see page 5-7) is set to Disabled, and N
(see page 5-7) is set to
I
D
NWARD
IALING
ISABLED
, and U
T
ISABLED
SER
ERM
IRECT
ETWORK
IRECT
, and U
is
T
SER
ERM
I
D
IRECT
NWARD
IALING
is selected. Setting this
61200263L1-1.1
Advertisement
Table of Contents
