Figure 6-50. Menu For Making The Packet Connections; Figure 6-51. Menu For Connecting Packet Endpoints To Physical Ports; Figure 6-52. Menu For Connecting Packet Endpoints To Physical Ports - ADTRAN ATLAS User Manual

Step 5
Step 6
Step 6-a
61200263L1-1.1
Make the packet connections (see Figure 6-50).

Figure 6-50. Menu for Making the Packet Connections

Connect the packet endpoints to the physical ports.
Each DS0 carrying voice from the PBX must be connected to the frame relay
endpoint. Figure 6-51 shows the entries for channels 1-21. The P
is the B packet endpoint.
_V
OSTON OICE

Figure 6-51. Menu for Connecting Packet Endpoints to Physical Ports

The TBOP endpoint is mapped to DS0 24 of the PBX connection. All 24 DS0s
of controller T1 port 2 are mapped to the private frame relay link to Boston.
Only 6 DS0s are required for the voice and signaling channels. The remain-
ing 18 channels are available for backing up the data link. The data link,
Boston_Data, is mapped to a T1 port on a T1/PRI module. Figure 6-52 shows
the remaining dedicated map entries.

Figure 6-52. Menu for Connecting Packet Endpoints to Physical Ports

ATLAS Frame Relay User Manual
Chapter 6. Frame Relay Configuration Examples
/PEP field
RT
6-19